A full cylinder will make up to 60L or sparkling water.

Download the manual here.

The Spirit One Touch is compatible with our plastic bottles, 1L - classic & fuse, as well as the 500ml bottles.

It's easy!
Place the sparkling water maker on a flat sturdy surface in an upright
position. Before inserting the carbonating bottle, make sure that the bottle rest is angled forward. If it isn’t, pull it towards you until it clicks. DO NOT pull the carbonation tube.
Insert the carbonating bottle neck into the Snap-Lock. Push the bottle up and back. The Snap-Lock will catch the bottle and hold it in a vertical position
suspended above the base.
NOTE: When properly inserted there is a small gap between the bottom of the carbonating bottle and the base of the sparkling water maker, so that's an easy way to tell if your bottle is placed correctly.

It's easy!
1. Place your Spirit One Touch sparkling water maker on a flat sturdy surface in an upright position.
2. Remove the back cover.
3. Insert the gas cylinder into the cylinder holder located on the underside of the carbonating button and screw it in, twisting clockwise. Apply gentle pressure until it is firmly held in place. Hand-tighten only, DO NOT use tools.
4. Replace the back cover so that it clicks into place.
5. You're all ready to carbonate! Bask in that bubbly and enjoy :)

We're glad you asked, because sparkling water is kind of our thing :)
To carbonate water with your Spirit One Touch sparkling water maker, follow these simple steps:
1. Fill your carbonating bottle with fresh cold tap or filtered water just to the "Fill Line" indicator. Pro-tip: keep a 2nd carbonating bottle full of tap water in the fridge so you always have a fresh bottle to carbonate.
2. Make sure you insert the carbonating bottle correctly. There will be a small gap between the bottom of the carbonating bottle and the base of the sparkling water maker when properly installed.
3. Choose your level of fizz and press the button! When carbonating with a 1L bottle, the functions of the carbonating buttons are: Left button (one drop) for light fizz Middle button (two drops) for medium fizz Right button (three drops) for high fizz When carbonating a 0.5L bottle, the functions of the carbonating buttons are: Left button (one drop) for medium fizz Middle button (two drops) for high fizz Right button should not be used.

Taking care of your sparkling water maker is super easy. Clean with a soft, damp cloth in lukewarm water.
Avoid using abrasive cleaners or sharp tools to clean. Wipe spills to keep base dry.
NEVER submerge in water or wash in a dishwasher.